[Product Principle] The battery of the electric mold transfer cart is placed inside the trolley, which provides electric power to the motor through the electrical control module, thus providing power for the reducer to drive the wheel drive system, and operating and stopping the trolley through an operating handle or wireless remote control. .
【Product Advantages】 The trackless mold transfer cart using rubber wheel,the larger the tonnage, the higher the flatness requirement of the ground, which is generally concrete or toughened ground. Due to the limited battery life, it is suitable for occasions with indoor irregular transport and low frequency of use.
【Features】
1, maintenance-free high-power AC drive system, providing reliable driving power; large-capacity battery, strong endurance;
2, unlimited remote control, simple operation, safe and stable;
3, standard imported controllers, meters, reliable, durable; waterproof and dustproof plug-in, to give the circuit a reliable protection, greatly reducing the electrical fault;
5, emergency power off switch, turn speed limit, undervoltage protection, and other personnel safety features to ensure traffic safety;
6, polyurethane rubber wheel, no damage to the ground, the body of high stability, not easy to slip;
7, optional side pull battery, large capacity battery; support non-standard customization, such as the weight, body size and so on.
Application of large tonnage mold transfer trackless flat cart
Example 1: Metal pipe fittings usually require multiple procedures such as flaw detection, shot blasting, painting, and drying. The trackless electric flat cart itself supplies power,not fixed the route, has a small turning radius, and the electric parts are properly protected. The trackless electric flat cart can be free transfer between different processing workshops and storage warehouses greatly improves work efficiency.
Example 2: The trackless flat cart has no fixed route and is flexible in action. The crane is used to lift the mould onto the trackless rubber cart. In order to prevent the mould from moving on the trackless mould cart by inertia, the rubber board is laid on the deck and the mould is placed from each place. It is transported to the corresponding station and has its own safety detection device. It automatically stops when a pedestrian or an obstacle is encountered. It is safe and reliable.
